Yes Fred it is proving to be very popular. I run a net (subject to conditions
lately) every Tuesday afternoon and including me and two late visitors to the
net there were five of us with IC-7300’s on Tuesday.
I identified my problem. In the connector menu list there was one option that i
kept ignoring It was CI-V TRANSCEIVE OFF. I changed this to on as I think I had
tried everything else possible and a slight screen jump with SD and I have
frequency and band on display.
Here’s hoping band conditions are fair.
73, Bryan M0OIC
> On 28 Oct 2016, at 19:10, FRED GORDON <fred_gordon@btinternet.com> wrote:
>
> Paul,
> I will be using the same radio and I suspect it is going to be a popular
> choice in time.
> 73's
> Fred
> --------------------------------------------
> On Thu, 27/10/16, Bryan <m0oic3867@gmail.com> wrote:
>
> Subject: [SD-User] IC7300 frequency readout
> To: "Paul O'Kane" <sd-user@contesting.com>
> Date: Thursday, 27 October, 2016, 22:47
>
> I am getting ready for his
> weekend’s contest and am using a different rig than last
> time.
>
> I now have an Icom IC-7300 which is working well in all
> modes but I have yet to have the frequency display evident
> in SD. I am using the standard USB cable and frequency is OK
> in ham Radio Deluxe etc so I know that it is reading OK.
> Using Windows 10 pro and it sees comport 3 OK and all is set
> ‘I think’ but obviously I am missing something. Any
> advice would be appreciated please.
>
> 73, Bryan M0OIC
>
>
>
>
> _______________________________________________
> SD-User mailing list
> SD-User@contesting.com
> http://lists.contesting.com/mailman/listinfo/sd-user
>
> _______________________________________________
> SD-User mailing list
> SD-User@contesting.com
> http://lists.contesting.com/mailman/listinfo/sd-user
_______________________________________________
SD-User mailing list
SD-User@contesting.com
http://lists.contesting.com/mailman/listinfo/sd-user
|