This problem could be due to timing issues, to errors in the
corresponding rig-control parameter (.SD) files - FT100SD and FT817.SD,
or to bugs in my code.
With regard to timing errors, it's always worth trying different baud
rates (if the rig permits), and use STOPBITS to change the number of
Stop Bits from 1 to 2 or vice-versa.
Sorry I can't be more specific, but I would need to get my hands on the
rigs in question to fix the problem.
73,
Paul EI5DI
On 10/10/2018 18:28, William Sefton via SD-User wrote:
Hi,
I'm having a similar issue with my FT817ND and SCU17 combination.
SD displays the correct frequency until I move to 20 meters, then it multiplies by ten the
frequency…..(14MHz becomes 140MHz and so on…)
If I plug in the IC703, then no issues at all……
Have played with different port settings, baud rates etc….still the same
Any other logger beit windows or Mac plays nice…but none are as good as SD (in
my opinion)
Any ideas ?????
Bill, G7PVZ
On 10 Oct 2018, at 16:23, g3wyw via SD-User wrote:
Allan,
Wow FT100 a blast from the past.
Have you tried 021.925 or 021925 for 15m
I'll have a look at the CAT commands.
73 Paul G3WYW
_______________________________________________
SD-User mailing list
SD-User@contesting.com
http://lists.contesting.com/mailman/listinfo/sd-user
|