TenTec
[Top] [All Lists]

Microphones

To: <tentec@contesting.com>
Subject: Microphones
From: kovar@ia.net (Jack Kovar KE0AX)
Date: Tue, 18 Feb 1997 06:55:31 -0600 (CST)
        Mike,

        I use a NON Amplified D104 with very positive results.
                                        
                                        Jack Kovar
                                             K0VAR
        

On Mon, 17 Feb 1997, Rick Blank wrote:

> > I recently purchased a TENTEC rig, Omin-D model 546.  It did not include a 
> > microphone.  I had a D-104 amplified mic available so I wired it up.  I 
> > have had good and bad reports on the audio quality, mostly good.  I need 
> > suggestions, to continue using this mic, modification for it, or other 
> > mikes that work well with this rig, for rag-chew and DX.  Maybe this one is 
> > find just depends who is listening. I would appreciate any suggestions.
> 
> Try bypassing the amp in the mike and using the element directly into 
> the rig and see what happens....just a suggestion, but, the crystal 
> element is high impedence and so is the rigs mike input, right?
> 
> It won't hurt to try!
> 
> CUL
> 
> 
> Rick Blank, KI5SL                      rblank@txdirect.net
> 2223 Blanco Road                       AMSAT NA# 26195
> San Antonio, Texas 78212
> 
> --
> FAQ on WWW:               http://www.contesting.com/TenTecFAQ.html
> Submissions:              tentec@contesting.com
> Administrative requests:  tentec-REQUEST@contesting.com
> Problems:                 w9tw@contesting.com
> Sponsored by:             Akorn Access, Inc & N4VJ / K4AAA
> 

--
FAQ on WWW:               http://www.contesting.com/TenTecFAQ.html
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 w9tw@contesting.com
Sponsored by:             Akorn Access, Inc & N4VJ / K4AAA

<Prev in Thread] Current Thread [Next in Thread>