TenTec
[Top] [All Lists]

[TenTec] VI Plus DSP clarification

To: <tentec@contesting.com>
Subject: [TenTec] VI Plus DSP clarification
From: sales@tentec.com (Ten-Tec, Inc.)
Date: Tue, 22 Jul 1997 15:28:17 Eastern Daylight Time
At 09:53 AM 7/21/97 -0400, you wrote:

>Before you discard the idea of the Plus' on-board DSP, consider the fact
>that your Timewave was designed to operate with EVERY radio, the
>designed-in DSP for the Plus was designed for Ten-Tec by a company that
>designs, produces, and sells DSP boxes; the difference here is the Plus DSP
>was designed specifically to operate WITH the circuitry of the OMNI
>receiver, meaning it's design can be optimized to it's one and only
>operating environment.

I wanted to interject that the DSP algorithms used in the Omni-VI 
Plus were designed by our engineering staff and that we did not use 
an outside company to design this for our use.  It was developed by
the same people that did the original Omni-VI logic, logic for earlier 
amateur radio transceivers, the upcoming DSP computer receiver, and our 
IF-DSP military equipment. 

DSP is here to stay in amateur radio!  

73,
Scott Robbins, W4PA
Amateur Radio Product Manager, Ten-Tec, Inc.  

NAQP CW contest - Aug. 2


--
FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm

<Prev in Thread] Current Thread [Next in Thread>