TenTec
[Top] [All Lists]

[TenTec] DSP & COMPUTER NOISE

To: <tentec@contesting.com>
Subject: [TenTec] DSP & COMPUTER NOISE
From: k8vt@ameritech.net (Carter Grabarczyk)
Date: Mon, 20 Jul 1998 07:29:13 -0400
Steve,
I'm not sure if the capacitors will do the job or not (however, if they
worked for you, you can't argue with success!)

Just a suggestion on connecting them, though.
Black wire to ground is OK; white wire to ground is OK. Green wire to
ground is just shorting out the capacitor because the green wire already
goes to ground. The third capacitor should go ACROSS black and white.
Also, try to find a capacitor with a voltage rating of 1.4 or 1.2 kV
(but 1 kV as a bare minimum).

73/Carter/K8VT



Steve Ellington wrote:
> install some .01 uf disc
> capacitors on the ac input. 3 will usually suffice. Solder one to each of
> the 3 power leads, green, white and black then solder the other end of these
> caps to a convient point on the case or a ground lug which is installed
> under a screw head somewhere.
>

--
FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>