TenTec
[Top] [All Lists]

[TenTec] Argonaut 509 - putting it together?

To: <tentec@contesting.com>
Subject: [TenTec] Argonaut 509 - putting it together?
From: k7sz@juno.com (Rick Arland)
Date: Sun, 16 Aug 1998 17:56:51 EDT

On Mon, 17 Aug 1998 07:27:58 +1000 (EST) Peter Parker
<parkerp@pcug.org.au> writes:
>
>Hi all - I've just bought a used Argonaut 509.  It works very well, 
>but I have a problem with screwing it together. 
>
>No matter how hard I try, I cannot screw on the sliding top panel (the 
>one holding the speaker) properly. There is a gap of about 10mm between 
>where the front panel should meet the sliding top. 

Hi Pete:

There is a plastic strip that runs full length of the top of the Argo
509. Sounds
like yours is missing. Try calling T-T to see if they still sell that
item. 

GL es 73 

Rich K7SZ

ARCI: 2388  NorCal: 483
G-QRP-C: 622   NW-QRP-C: 24
Author of Low Power Communications Vols 1-3
Worldradio QRP Column Editor 1987 to 1994
Monitoring Times Contributing Editor (K.I.S. Radio)
Commander, Wyoming Valley QRP Commandos

_____________________________________________________________________
You don't need to buy Internet access to use free Internet e-mail.
Get completely free e-mail from Juno at http://www.juno.com
Or call Juno at (800) 654-JUNO [654-5866]

--
FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>