Robert wrote:
>
> I noticed on the 705, that the VOX switch on the bottom of the mic MUST
> also be in VOX mode... So, on my Omni Vi+ the configuration to run VOX is
> Vox mode on Omni lit (on), 705 mic switch on bottom set to VOX, and, the
> lock button enabled (little black button) so that the red led on mic is
> activated.
According to the instructions that come with the TT705, "When using the
microphone with Ten-tec transceivers, however, this switch must be in
the PTT position." The slide switch on the bottom of the mic is provided
for use with non-TT gear. When using an Omni 6+, you only need to press
the VOX button on the rig and lock the mic on with the black button on
the mic. Hope this helps.
Vince/K7NA
--
FAQ on WWW: http://www.contesting.com/tentecfaq.htm
Submissions: tentec@contesting.com
Administrative requests: tentec-REQUEST@contesting.com
Problems: owner-tentec@contesting.com
Search: http://www.contesting.com/km9p/search.htm
|