TenTec
[Top] [All Lists]

[TenTec] RF & Pegasus

To: <tentec@contesting.com>
Subject: [TenTec] RF & Pegasus
From: at060@chebucto.ns.ca (David McClafferty)
Date: Thu, 9 Dec 1999 13:22:19 -0400 (AST)


On Thu, 9 Dec 1999, JEFF S JOHNSON wrote:

> 
> I should hope Pegasus has DC voltage out for the Mic. so a battery is not
> needed.
> 

I did not have a battery in my 705 when I used it with the Omni V. When I
got the Pegasus the LED on the 705  base would only glow very dimly and
the rig was obviously not being fully modulated, so I had to put a battery
in. The manual says it provides 4.5 Volts for electret mics. Appearently
that not enough for the 705. I hope that we will get schematics someday so
one could look into modifying such things. I hate batteries, they leak and
ruin a lot of good gear.

                                73, Dave, VE1ADH



--
FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>