TenTec
[Top] [All Lists]

[TenTec] Titan Problem

To: <tentec@contesting.com>
Subject: [TenTec] Titan Problem
From: n4lq@iglou.com (Steve Ellington)
Date: Mon, 3 Apr 2000 14:47:12 -0400 (EDT)
Sounds like the relay is sticking. Someone suggested reversing the leads
on the relay's coil as a fix. I'm not sure if it would help but maybe
worth a shot.
 > 
> One of the relays is sticking in my Titan Model 425.  When this happens
> the relay(s)(?) stick in transmit. I have no receive signals. If I rap
> the case in the left lower rear corner the relay lets go and I can hear
> again.  The likely culprit would be the vacuum relay.  Once, when very
> stuck, I was able to remove power and actually rap the vacuum relay.
> This fixed the problem for a while. I spend most of my time on 160 using
> separate RX antennas so I forgot about this problem. I just got an
> FT-1000MP [ had an FT-920] and I was enjoying the pleasures of  a new
> rig and QSK when it stuck and reminded me of the problem. Anyone have
> this or a similar experience?
> My Titan's serial number is 425-01086.
> 73, Sid K3SX


Steve Ellington N4LQ
N4LQ@IGLOU.COM

--
FAQ on WWW:               http://www.contesting.com/tentecfaq.htm
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com
Search:                   http://www.contesting.com/km9p/search.htm


<Prev in Thread] Current Thread [Next in Thread>