TenTec
[Top] [All Lists]

[TenTec] SB-221 and Omni 6+ question

To: <tentec@contesting.com>
Subject: [TenTec] SB-221 and Omni 6+ question
From: geraldj@ames.net (Dr. Gerald N. Johnson, electrical engineer)
Date: Fri, 15 Dec 2000 02:59:28 -0600
Dale L Martin wrote:
> 
> >
> > Hello folks, I need some help here. I just picked up a Heathkit SB-
> > 221 and woul like to hook it up with my Omni 6+. The problem is
> > that there was no manual with the amp. Will the relay on the Omni
> > handle the voltage from the amp or do I need to build an interface?
> > Not having the manual is a real pain, if anyone has one of these
> > amps could you pass along the tuning procedure you use please.
> > My main amp is the QRO HF2500DX and the tuning method for it
> > is quite a bit different from a standard amp.
> >
> 
> Hardware replacement is expensive.  Manuals are cheap.
> 
> Check out http://www.w7fg.com/
> 
> Click on Catlog of Manuals
> 
> Click on H
> 
> Scroll down to find your manual.
> 
> 73,
> dale, kg5u
> 

Or contact Heath Company at Bentor Harbor Michigan.

73, Jerry, K0CQ

--
FAQ on WWW:               http://www.contesting.com/FAQ/tentec
Submissions:              tentec@contesting.com
Administrative requests:  tentec-REQUEST@contesting.com
Problems:                 owner-tentec@contesting.com


<Prev in Thread] Current Thread [Next in Thread>