Hi Ed:
I think I missed replying to you, if so here is the data:
Use two Radio Shack #32-1031 Line Transformers, and no they are not 1:1. The
primary taps are in wattage of .62w to 10w, I used the 1.25watt taps and the
secondary taps are in ohms 4, 8 & 16. I connected the primarys together and
fed one sec. from the Jupiter on 4ohm tap and my speaker with the other
transformer with the 8 ohm tap.
Nice clean audio no degradation of level or response.
--
73's
Jack, W7EJJ
----- Original Message -----
From: "Ed W3NR" <w3nr@vol.com>
To: "Jack Malone" <malonej@c2i2.com>
Sent: Sunday, May 20, 2001 1:15 PM
Subject: Re: [TenTec] Jupiter External Speaker
> Jack, I assume thats 1:1 600 ohm red core ?? I have several in my junk box
> if this is correct. Thanks
>
> Ed W3NR
>
>
--
FAQ on WWW: http://www.contesting.com/FAQ/tentec
Submissions: tentec@contesting.com
Administrative requests: tentec-REQUEST@contesting.com
Problems: owner-tentec@contesting.com
|