TenTec
[Top] [All Lists]

[TenTec] Omni V - External DSP Interfacing

To: <tentec@contesting.com>
Subject: [TenTec] Omni V - External DSP Interfacing
From: n4lq@iglou.com (n4lq@iglou.com)
Date: Fri, 22 Feb 2002 08:59:47 -0500
That's interesting. I had the same problem with the NIR-12 then I bought 
an MFJ DSP and the sidetone worked great without any bypassing of the 
sidetone. In fact, it cleaned up the sidetone a lot and reduced the agc 
thumping. I was impressed.

N4LQ

-----Original Message-----
From: "John Huffman" <hjohnc@core.com>
To: "tentec" <tentec@contesting.com>
To: <tentec@contesting.com>
Date: Fri, 22 Feb 2002 08:22:57 -0500
Subject: [TenTec] Omni V - External DSP Interfacing

> I'd prefer not to reinvent the wheel.  Has anyone hooked an external
> DSP
> unit to an Omni V and maintained QSK while switching the unit out
> during
> transmit?
> 
> Just picked up a Timewave DSP-59+.  To hear the CW sidetone you need to
> switch the unit out during transmit.  There is a jack on the back of
> the
> unit for the connection.  If I connect it to the RELAY jack on the back
> of
> the Omni it introduces a delay.  No QSK.  If I shorten the delay to a
> minimum, the relay is clacking away.
> 
> My guess is that there is a way to hook up the TX EN/TX OUT to make
> this
> work.
> 
> Maybe an experienced Omni owner can save me some time and tell me their
> secret.
> 
> TIA es 73 de K8HJ
> John
> 
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
> 


<Prev in Thread] Current Thread [Next in Thread>