TenTec
[Top] [All Lists]

[TenTec] Argosy compared to OMNI's

To: <tentec@contesting.com>
Subject: [TenTec] Argosy compared to OMNI's
From: N4NT@chartertn.net (Mike Hyder -N4NT-)
Date: Wed, 3 Apr 2002 21:35:49 -0500
The argosy needs to have its stock 4-pole crystal filter replaced by the
model 220 SSB filter.  After that it works and sounds like the old
Omni/Triton rigs, except as you say for the AGC.  This filter needs to
be replaced EVEN if the rig is only to be used on CW.

Mike

----- Original Message -----
From: "Tim and Nancy Logan" <cyr999@extremezone.com>
To: "tentec reflector" <tentec@contesting.com>
Sent: Wednesday, April 03, 2002 9:12 PM
Subject: [TenTec] Argosy compared to OMNI's


| Does anyone have an Argosy running next to any OMNI from the C thru
the
| VI+? Ignoring the AGC question, did the Argosy perform it's basic
| receive and QSK functions as well as the OMNI's or was it a "step
along
| the way"? Thanks in advance for any responses.
|
| 73/Tim Logan NZ7C
| _______________________________________________
| TenTec mailing list
| TenTec@contesting.com
| http://lists.contesting.com/mailman/listinfo/tentec
|


<Prev in Thread] Current Thread [Next in Thread>