I found message below in archives-
But. I have a slight problem. When checking my R-46 it is a 47 kohms not
100 kohms.
My lower power limit seems to be 5 watts.
Anyone else do this mod?
OMNI V QRP mod
Scott Rosenfeld NF3I ham@w3eax.umd.edu
Sat, 3 Aug 1996 06:58:07 +1030
Scott, KY2P, forwarded me the mod to allow the OMNI V to be cranked down
to about 1 watt while retaining the ability to run 100 watts.
On the 9 MHz IF board:
R46 change from 100 to 10 kohms, then reset R48, the ALC pot.
That's it. Did it last night, my QRPp OMNI V is doing great! Verified
1
watt output on my Oak Hills WM-1.
|