Hi Mark, et al-
yeah, that was me- the jacks on mine were soldered a bit light. If it
seems like the RCA plugs are bad, but changing to a new cable doesn't help,
check the solder connections on the jacks.
DK :-)
At 12:43 AM 08/05/2002 +0100, you wrote:
>It seems to me awhile back someone had the same problem and they
>mentioned that the jacks themselves for the TXOUT and TXEN were
>intermittant and needed resoldered to the board they mount on (?) May
>have been on the other Ten Tec reflector...
>
>Mark N8COO
>
>
>On Sat, 3 Aug 2002 17:17:10 -0500 Duane A Calvin <ac5aa@juno.com> writes:
>> Just started in NAQP and am having a repeat of a problem I saw in the
>> RTTY NAQP that I thought was antenna-related. It's not. Hoping
>> someone
>> can point me in the right direction since finding my way through the
>> VI+
>> manual in a hurry is not netting me any results. My Omni VI+, Nov
>> '97
>> vintage, has a problem where, intermittently, it will lose transmit.
>>
>> Sidetone continues to operate, and (at least a couple of weeks ago)
>> Tune
>> would output full power while transmit would not. It has worked in
>> between, but about 30 minutes into the NAQP CW, power out dropped to
>> zero
>> again. I tried cycling the power supply (nil), and the heat sink is
>> barely warm (unlike in the RTTY!). Any suggestinos of where to
>> start? I
>> can't even find which board does the TR switching...
>>
>> 73, Duane
>> --------------------------------------
>> Duane Calvin, AC5AA
>> Austin, Texas
>>
>> http://home.austin.rr.com/ac5aa
>> _______________________________________________
>> TenTec mailing list
>> TenTec@contesting.com
>> http://lists.contesting.com/mailman/listinfo/tentec
>
>_______________________________________________
>TenTec mailing list
>TenTec@contesting.com
>http://lists.contesting.com/mailman/listinfo/tentec
>
>
73's from KW0D Dave in LeClaire, Iowa
|