[TenTec] IF gain pot

To:	<tentec@contesting.com>
Subject:	[TenTec] IF gain pot
From:	rohre@arlut.utexas.edu (Stuart Rohre)
Date:	Mon, 7 Oct 2002 14:13:53 -0500

Probably you are overloading subsequent stages by setting it arbitrarily to
maximum.
73, Stuart K5KVH
It should be set to give optimum sensitivity below the threshold of splatter
in the following stages.

<Prev in Thread]	Current Thread	[Next in Thread>
[TenTec] Have you Noticed, Bill Marvin KB9IV [TenTec] Have you Noticed, William Mansey; WA2PVK [TenTec] Have you Noticed, <cherry@getnet.net (Jim FitzSimons) [TenTec] Have you Noticed, <ghoffman@spacetech.com (Gary Hoffman) [TenTec] IF gain pot, <cherry@getnet.net (Jim FitzSimons) [TenTec] IF gain pot, Duane Grotophorst [TenTec] IF gain pot, Irvin Weinman [TenTec] IF gain pot, <cherry@getnet.net (Jim FitzSimons) [TenTec] IF gain pot, Stuart Rohre <= [TenTec] Have you Noticed, David McClafferty

Previous by Date:	[TenTec] microphones, w8au@sssnet.com
Next by Date:	[TenTec] FS argonaut509-delta 580, Michael Herman
Previous by Thread:	[TenTec] IF gain pot, <cherry@getnet.net (Jim FitzSimons)
Next by Thread:	[TenTec] Have you Noticed, David McClafferty
Indexes:	[Date] [Thread] [Top] [All Lists]