The timeout is 2 seconds and you can turn it off or on with my software.
But w4chl may be referring to the EXT T/R line which is user setable from
zero to about 2 seconds to control how long a linear keeps its antenna relay
enabled before returning to receive.
Carl Moreschi N4PY
Franklinton, NC
----- Original Message -----
From: "Mark Erbaugh" <mark@microenh.com>
To: <tentec@contesting.com>
Sent: Friday, May 09, 2003 1:36 PM
Subject: Re: [TenTec] Transmit timeout in Pegasus ?
> Mark,
>
> There is a 'Keep Alive' feature where the Pegasus will go out of TX if it
> doesn't receive communication from the host computer within a short time.
As
> documented in the Programmer's Reference Guide (PRG). They intended to
allow
> that delay to be programmable. However, I spoke to Gary Barbour at TT
about
> it as there is no mention of how to set the time in the PRG. He replied
that
> the timeout period is fixed. In my experience it's on the order of a
second
> or less. The 'Keep Alive' can be enabled or disabled. I don't think that
> would work for your transmit TO.
>
> 73,
> Mark
>
> ----- Original Message -----
> From: <w4chl@mindspring.com>
> To: <tentec@contesting.com>
> Sent: Friday, May 09, 2003 0:36 AM
> Subject: [TenTec] Transmit timeout in Pegasus ?
>
>
> > I suspect that it is fuzzy brain more than anything else, but is there a
> > transmit timeout setting on a TenTec Pegasus ? If so, where is it
> > settable ?
> >
> > Cheers & 73s de Mark W4CHL
> >
> > Chapel Hill NC USA http://rtpnet.org/parc
> > _______________________________________________
> > TenTec mailing list
> > TenTec@contesting.com
> > http://lists.contesting.com/mailman/listinfo/tentec
> >
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
|