TenTec
[Top] [All Lists]

Re: [TenTec] Orion SWR protection

To: tentec@contesting.com
Subject: Re: [TenTec] Orion SWR protection
From: Pete Smith <n4zr@contesting.com>
Reply-to: tentec@contesting.com
Date: Fri, 09 May 2003 08:35:38 -0400
List-post: <mailto:tentec@contesting.com>
At 05:33 AM 5/9/03 -0400, you wrote:
The specification of "25 amperes" covers ORION's performance under all specified conditions, but if your antenna impedance is between 50 and 100 ohms, including moderate reactance, a 22-ampere power supply will run ORION at close to full power. If you must have full power under all specified conditions, ORION needs 25 amperes.

        Simple answer is, full rated power at SWR 2.0:1 and below.

This looks suspiciously like a similar statement in my Mark 5 manual, but the Mark 5's protection kicks in rapidly and rather below 2:1 indicated, while that in the TS-930 comes into play more gradually. I guess I could have asked the question better -- how aggressively does the Orion ACTUALLY reduce the output power as the SWR approaches 2:1, and what part does reactance play in that? Presumably, it isn't just a question of 25-100 ohms resistive... what is "moderate reactance," to borrow the term used in the manual?

73, Pete N4ZR
The World HF Contest Station Database was updated 11 April 03.
Are you current? www.pvrc.org/wcsd/wcsdsearch.htm



<Prev in Thread] Current Thread [Next in Thread>