Earl,
F Y I
On the upper left hand corner of the screen display is a TUNE button.
If you have POWER adjust selected you can set the power to any level
from 1 to 100 watts for tune up in any mode. I usually tune my 238
antenna tuner with about twenty watts output.
73,
Bill - K6WLM
k6se@juno.com wrote:
>
> My new Orion is scheduled to be delivered Friday, May 16th. I've
> downloaded the operating manual and cannot find anything specific in it
> about supplying a continuous transmitter output, needed for tuning up a
> linear amplifier.
>
> It appears that one way would be to put the radio in the CW mode, then
> turn off the internal keyer (straight key mode), and then push my paddle
> to the dit side. This seems to me to be a rather unwieldy way to
> accomplish amp tuning.
>
> If the radio is in the CW mode, will simply activating the PTT switch on
> the microphone accomplish the desired result?
>
> 73, de Earl, K6SE
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
|