TenTec
[Top] [All Lists]

Re: [TenTec] Re: Astron mod

To: <tentec@contesting.com>
Subject: Re: [TenTec] Re: Astron mod
From: "WILLIAM MANSEY" <wa2pvk@msn.com>
Reply-to: tentec@contesting.com
Date: Thu, 22 May 2003 11:25:15 -0400
List-post: <mailto:tentec@contesting.com>
Hi Larry,
    I can not speak for all Astrons but none of mine have provisions for
remote sensing.  I am aware of the Lambda power supplies.  I had a 60 amp (9
~ 15 volt) one that had to weigh at least 100 pounds!
    It probably would not be hard to modify the power supply for remote
sensing but this would require a lot of RF proofing because the 723
regulators do not like RF very much.  I eliminate much of this problem by
using heavy wiring as much as possible.  This minimizes voltage drop under
load.   73, Bill

<Prev in Thread] Current Thread [Next in Thread>