On/off switches on the Corsair II work like those on the Triton IV.
Someone at Ten Tec (probably Garland Jenkins) told me to leave the rig
switch for the Triton constantly on and use the PS switch. The push-pull
switch on the Triton will wear out sooner.
Jim N4AL
Jim Reid wrote:
> Ok, what is THE method for powering up a Corsair II?
>
> Do I turn ON the PS 961 with the Corsair power switch
> already ON? The 961 will NOT power up without the
> Corsair being ON. So that is what I have been doing.
>
> But then, when going QRT, should I reach over and
> just switch OFF the 961, leaving the power switch
> on the Corsair at ON? Or, turn OFF the Corsair
> switch, which will also "kill" the power on the 961,
> or 962 should I happen to be using that one at the
> moment?
>
> Whish switch can handle the most current? The one
> in the Corsair II, or that over on the Ten Tec power
> supplies?
>
> 73, Jim KH7M
>
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
|