Since this only happens when you are running the Titan, I would suspect an
RFI issue - not blaming the hardware or software of the Orion. Now, maybe
there is something going on in the Orion that is more sensitive to RF, but the
basic problem - and the solution - may have more to do with eliminating ground
loops, improving the RF ground and isolating the Orion from the feedline and
the Titan. Do you have line isolators installed between all the components
and where is your RF ground?
k4ia
Craig "Buck"
Fredericksburg, Virginia USA
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|