TenTec
[Top] [All Lists]

[Orion] N4PY Orion Control Program Version 1.14 now available

To: <n4pysoftware@yahoogroups.com>, "tentec" <tentec@contesting.com>,<orion@contesting.com>
Subject: [Orion] N4PY Orion Control Program Version 1.14 now available
From: "Carl Moreschi" <n4py@earthlink.net>
Date: Thu, 3 Feb 2005 11:49:08 -0500
List-post: <mailto:orion@contesting.com>
Version 1.14 of my Orion control program is now available to all registered
users.  Highlites of the new version are:

Version 1.14

  1)
  Added two additional scratch pad memories.

  2)
  Prevent high speed tuning mode from coming on if SPLIT is active.

  3)
  Added Ctrl-Arrow Up to move PBT up and Ctrl-Arrow Down to move PBT down.

  4)
  Added remembering RF gain control setting by band.

  5)
  Force RF gain on sub-receiver to 100 when sweep is run.

  6)
  The RF gain control can now be toggled to control the VFO B receiver
  RF gain.  This is done by clicking the RF label above the slider.
  Upper case "RF" indicates the control is for VFO A and lower case
  "rf" indicates the control is for VFO B.

  7)
  Added FSK capability to the external logging program interface
  and WriteLog.

  8)
  Added a front panel AGC decay slider that is shared with the front
  panel AGC threshold control.  The slider label for this control is
  a toggle button to go between threshold and decay.

  9)
  Moved the CW keyboard memory edit boxes to the CW Keyboard window.

  10)
  Added an AGC restore at program exit to restore the Orion AGC speed
  to slow, medium, or fast.

  11)
  Added the "Esc" key to get out of direct frequency entry mode if no
  numeric keys have been pressed.

73,

Carl Moreschi N4PY
Franklinton, NC

_______________________________________________
Orion mailing list
Orion@contesting.com
http://lists.contesting.com/mailman/listinfo/orion

<Prev in Thread] Current Thread [Next in Thread>
  • [Orion] N4PY Orion Control Program Version 1.14 now available, Carl Moreschi <=