TenTec
[Top] [All Lists]

Re: [TenTec] Orion and TVI

To: <kg6tt@tomorrowsweb.com>,"Discussion of Ten-Tec Equipment" <tentec@contesting.com>
Subject: Re: [TenTec] Orion and TVI
From: "Steve Baron - KB3MM" <SteveBaron@StarLinX.com>
Reply-to: Steve Baron - KB3MM <SteveBaron@StarLinX.com>,Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Fri, 29 Apr 2005 16:24:41 -0000
List-post: <mailto:tentec@contesting.com>
wHAT IS YOUR ps?

----- Original Message ----- 
From: "Jerry Volpe" <kg6tt@tomorrowsweb.com>
To: "Discussion of Ten-Tec Equipment" <tentec@contesting.com>
Cc: <crosta@aero.polimi.it>
Sent: Friday, April 29, 2005 06:04
Subject: Re: [TenTec] Orion and TVI


>
> >If you are having "TVI" problems with an Orion, you're blaming the wrong
> >piece of equipment and need to be looking somewhere else in your station.
> >
> >
> >
> I was not blaming the Orion. You can't fix the problem by changing
> someting in the Orion. You have to look to the surrounding environment.
> And I wouldn't rule out the power supply that was added as the Kenwood
> has a built in power supply so there is a second piece of equipment that
> changed in the station in addition to the Orion itself.... but I
> mentioned that in my previous post. If the power supply is generating
> sufficient, clean DC power and absolutely everything else is the same in
> his station then more likely stray RF is coupling back into the Orion
> via one of its other interconnects (mic, key, paddles, computer, etc.).
> Of course the RF that is causing this now was there before with the
> Kenwood but for what ever reason the Kenwood just wasn't as sensitive to
> it in that station configuration.
>
> 73,
> Jerry, KG6TT
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>


_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>