TenTec
[Top] [All Lists]

Re: [TenTec] Open Wire Feeders

To: tentec@contesting.com
Subject: Re: [TenTec] Open Wire Feeders
From: CATFISHTWO@aol.com
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Wed, 1 Feb 2006 22:33:02 EST
List-post: <mailto:tentec@contesting.com>
try rolling your own with some 14 gauge copperweld and some homebrew  
spreaders,  the wider the space the better, 
 
I saw a set where the guy ran a pair about 3 fee apart supported on posts  
with pvc T's about every 30 feet for a run of near 3000 feet to his tower, he  
ran a balun from coax from the shack and on the far end ran a balun back to 
coax  for up the tower, looked like 2 cattle fences side by side with the 
bottom 
wires  missing, he said it worked great.. 
 
tom N6AJR
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>