TenTec
[Top] [All Lists]

Re: [TenTec] Question about FSK with Orion II

To: "Discussion of Ten-Tec Equipment" <tentec@contesting.com>
Subject: Re: [TenTec] Question about FSK with Orion II
From: "Douglas Shock" <douglas.shock@gmail.com>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Sat, 18 Feb 2006 23:06:52 -0700
List-post: <mailto:tentec@contesting.com>
Yes Larry, I found this odd as well. I am not sure what the results would be
jumpering. I just said to heck with it and made a new cable today. I am not
sure what TenTec was thinking on this one.

On 2/18/06, Larry Menzel <retire@means.net> wrote:
>
> I recently questioned TT about this very thing.
>
> If you want pin 7 along with the PPT (pin 3) and the audio in and out,
> you'll have to build your own cable.  They include an 8 pin DIN with the
> radio for this purpose.
>
> The problem is that they're trying to make one cable work for several
> radios, and so thay don't make one that has all 8 pins connected.
>
> Yes, you an open up the DIN connector and move pin 5 to pin 7. Just note
> it
> in your manual in case someone else ever owns your Orion.
>
> So, get out your soldering iron, find some nice shielded cable and make
> what
> you need.
>
> It's that simple.
>
> Larry, N0XB
> Northfield, MN
>
> ----- Original Message -----
> From: <CaseKE@aol.com>
> To: <tentec@contesting.com>
> Sent: Saturday, February 18, 2006 11:06 PM
> Subject: [TenTec] Question about FSK with Orion II
>
>
> >I would like to use the Auxiliary I/O plug and cable sent with the Orion
> II
> > without modification if possible.  The I/O socket is 8-pin and the plug
> is
> > 5-pin.  Pin 5 of the socket is a "no connection (NC)," but pin 5 of the
> > plug does
> > have a wire connected to it (Red).   FSK is available on pin 7 of the
> > socket,
> > but there is no pin 7 of the plug (does this strike anybody else as
> > strange?).
> > Can I simply put a jumper from pin 5 of the socket to pin 7 of the
> socket
> > (or alternatively rewire pin 7 to pin 5) so I have FSK on pin 5 of the
> > supplied
> > plug and cable?
> >
> > Thanks,  Ken K5KC
> > _______________________________________________
> > TenTec mailing list
> > TenTec@contesting.com
> > http://lists.contesting.com/mailman/listinfo/tentec
> >
> >
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>