here is WMR's response to my querry about the RIGtalker, Buck:
Jack,
No, the RIGtalk will not work as it has a TTL level output and the Orion
requires an RS-232 level interface.
What you need is our "IOGEAR USB to Serial Port Adapter" and a "DB9M to DB9F
Serial / Extension Cable".
They are available under RIGblaster Accessories here ==>
http://www.westmountainradio.com/order_us48a.htm .
good luck,
jack
----- Original Message -----
From: <K4IA@aol.com>
To: <tentec@contesting.com>
Sent: Tuesday, May 16, 2006 8:18 PM
Subject: Re: [TenTec] usb to serial
>
> In a message dated 5/16/2006 10:14:44 P.M. Eastern Standard Time,
> jfriend31@comcast.net writes:
>
> that is a challenge for the folks who have no slots tho.
>
>
>
> That was my problem. Computers don't come with lots of extra slots and
> laptops have none. I would try the USB cable, they are not that
> expensive and
> chances are it will work. Then you have a permanent solution that will
> also
> work if you ever transfer to a laptop.
>
> k4ia
> Craig "Buck"
> Fredericksburg, Virginia USA
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|