On Sun, 2006-06-18 at 18:58 +0100, Bob Towers wrote:
>
>
> On 18/06/2006 at 11:25 W8KEB wrote:
>
> >Bob all you need to get the Argonaut V on Digtal modes is the Rascal GLX
> >interface from Buck. Do a Google on Rascal GLX and the web site will come
> >up. For Computer control all you need is a DB-9 Serial Cable and the N4PY
> >Argonaut V Control Program. I have used both and they work great with the
> >Argonaut V.
> >
> >Ken/w8keb
> >
> Thanks, Ken, but I'm looking for the cable makeup ie which pin to which pin
> on the DB9 connectors, not a ready made up cable which would take at least 10
> days to get here from your side of The Pond...
>
> Plus I need to get it to run with MixW which covers all the digital modes I
> run.
>
> 73
>
> Bob
> 2M0KDZ
The standard 9 pin computer serial cable is pin to pin. E.g. 1 to 1, 2
to 2, etc. All we have were made far closer to you by slave labor in
China. After shipping half way around the world they run as low as $3
US. Those cables are commonly used between the computer and a serial,
keyboard, or mouse switch. You have to match the sexes on each end.
--
73, Jerry, K0CQ,
All content copyright Dr. Gerald N. Johnson, electrical engineer
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|