TenTec
[Top] [All Lists]

[TenTec] Description of new Omni-VII from Ten-Tec

To: Ten-Tec mailing list <tentec@contesting.com>
Subject: [TenTec] Description of new Omni-VII from Ten-Tec
From: Ken N9VV <n9vv@sbcglobal.net>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Thu, 03 Aug 2006 16:08:21 -0500
List-post: <mailto:tentec@contesting.com>
http://radio.tentec.com/Amateur
http://radio.tentec.com/Amateur/Transceivers/TT588

[cut and pasted into this message without permission from Ten-Tec]

COMING OCTOBER 2006
The legendary OMNI series returns with
OMNI-VII

OMNI-VII is the first truly Net-Ready ham transceiver.  No PC 
required at the rig to operate remote! Locate your OMNI-VII anywhere 
you have wideband Internet access.  Simply  connect its built-in 
Ethernet port to your router with our exclusive One Plug connection.

Delivers live receive AND transmit operation from anywhere else in 
the world from another wideband Internet access!  A simple GUI 
(Graphical User Interface) written for the OMNI-VII is included. 
That is not all - the latest GUI source code (written in  Visual 
Basic) and complete programming instructions can be downloaded to 
build your own GUI.

Unrivaled Close-in Dynamic Range in price class.  OMNI-VII just 
raised the receiver performance bar for the competition!  Our new 
Distributed Roofing Filter architecture places narrow filters in 
both the 1st and 2nd IFs at just the right places.  Two built-in 
filters at 20 kHz and 6 kHz are included, optional Collins 
mechanical filters at 2.5 kHz, 500 Hz, 300 Hz are also available. 
Filters can be selected manually or use AUTO for automatic selection 
via front panel DSP Bandwidth control. Also included are 34 built-in 
DSP bandwidth filters from a minimum of 150 Hz to 9 kHz maximum.

Take a look at what else OMNI-VII brings to your shack:
HF + 6:  Transmit coverage on 6 through 160 meters, 100 watts 
output, even on 6.  General coverage receive from 500 kHz to 30 MHz 
continuous plus 50 to 54 MHz.   SSB, CW, AM, FM,

Digital modes.  Dual VFOs with SPLIT and REVERSE functions.
Full-function Color Screen:  STN transmissive color LCD display with 
CFL backlight, 320 x 240 pixels.

Legendary QSK CW includes adjustable rise and decay times. User 
adjustable at the touch of a knob for "hard" or "soft" keying 
according to your taste.

Built-in keyer can be used in Curtis A or B modes, adjustable 5-63 
WPM. 18 selectable transmit bandwidths: from 1000-4400 Hz.

DSP-generated to give your SSB audio a well rounded sound tailored 
to your voice characteristics.  A low frequency roll-off provides 
further control.

RX EQ in 6 db/octave filters selectable in 1-dB steps from high 
pitched at minus 20 dB to essentially flat response at 0 dB to bassy 
at plus 20 dB. DSP Noise Reduction, automatic notch and manual notch 
reduces interference from undesired carriers and random noise. 
Manual notch range 20-4000 Hz center, 10-300 Hz width, 60 dB rejection.

Band Sweep gives you a snapshot of the entire band in seconds.  Find 
the pileups or scout for a clear spot automatically without touching 
the tuning knob.

Broad range Auto Tuner: identical tuner as used in the ORION II, 
matches most antennas up to 10:1 SWR (3:1 on 6 meters).  100 Tune 
Memories.  Order your OMNI-VII with or without this option.

Three antenna connectors:  Two SO-239 transceiver outputs, plus a 
third SO-239 connector for auxiliary receive-only antenna.  Antenna 
switching is front panel selectable.

Remote Control in the Shack: In addition to remote control over the 
Internet, the TEN-TEC

GUI will also control the OMNI-VII from the Ethernet port on your 
PC, including RX and TX audio.  Alternatively, numerous other 
programs already on the market can control the rig using the serial 
interface (no audio).

Updates by Flash-ROM: Serial port interface for local rig control 
via PC and for Flash-ROM updates available via the Internet. 
Commands are a superset of those used for the Jupiter.  To obtain 
the very latest version of the OMNI-VII, visit our firmware download 
website at www.rfsquared.com and download the software.  Connect the 
radio to a serial port on your PC and you are up to date in a flash. 
  Easy!

Quad bandstacking registers and 100 memories

Optional Model 302R remote encoder/keypad works with the OMNI-VII. 
Plug it in and control selected features sitting back in your easy 
chair.

Aluminum chassis construction and steel outer case makes the rig an 
easy traveler at only 5 inches H x 12 inches W x 14.75 inches D. 
Weighs just 14 pounds!
8 pin mike connector as used on ORION II

Estimated availability:  October 2006

Retail Price:  TBA.  The OMNI-VII will be positioned between the 
JUPITER and ORION II price classes.  We are not taking orders at 
this time.

Complete specifications will be posted to the TEN-TEC webpage prior 
to the on-sale date of the transceiver.

This device has not been approved by the FCC.   This device may not 
be offered for sale or lease or sold or leased until the approval of 
FCC has been obtained.   The information shown is preliminary and is 
subject to change without obligation or notice.
----------------------------------------------------------------------
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>