TenTec
[Top] [All Lists]

[TenTec] TenTec HF xcvr and other misc items FS

To: "TenTec List at contesting (TenTec List at contesting)" <tentec@contesting.com>
Subject: [TenTec] TenTec HF xcvr and other misc items FS
From: "Ken Simpson, W8EK" <W8EK@speakeasy.net>
Reply-to: W8EK@speakeasy.net,Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Sun, 25 Feb 2007 14:50:37 -0500
List-post: <mailto:tentec@contesting.com>
TenTec items for sale:

TenTec 585 Paragon HF transceiver
This rig covers 160 thru 10 meters, including the WARC
bands.  It has a general coverage receiver, that includes
SSB, CW, and AM.  An optional FM adapter is available
for it.  Of course it has digital readout, memories, scan,
dual VFOs, PBT, notch filter, etc.  It has an extremely 
effective "Jones filter" to allow varying the passband, 
and its location in the spectrum.  It has up to 100 Watts 
output, that can be adjusted down to milliwatts for QRP 
use, if desired. This particular unit works 100% and looks 
really great.  Big inch thick manual is included.  TenTec 
sells these used for $795.  This one is just as nice, but 
is only $650.

TenTec 299 Voice synthesized frequency read out
This unit is used with the TenTec Omni 546 series A, B, C,
some Argonauts, Corsair, and others.  It will work with 
other rigs (such as the Triton), with minor mods to get 
the right connections.
The 299 is used primarily for blind hams who can not read the
frequency readout on the transceiver.  By pushing a button, it
will "speak" the frequency (to tenth of a KHz).  A front panel
switch permits selection of the entire frequency, or you can
eliminate the MHz, and give only the KHz.  There is also a
volume control on the front panel.
Of course it can also be used to give a "voice digital readout"
to any rig with an analog dial, or used a normal frequency counter.
This particular unit is in great shape electrically.  Cosmetically
it looks very nice, but has some very minor wear.  $ 190 

TenTec 288, 1.8 KHz filter
1800 hz for narrow SSB or wide CW
Fits Corsairs, Paragons, Omni V and VI, and others.
This one has its paperwork and looks like new.  $70

TenTec hand microphone
There is no model number on this mic, but I think it is a model 
700 C; at least that is what the paper work says.  It has the 4 pin 
connector on it, works fine, and looks like new.  $35

Prices do not include shipping from Florida.

Thanks.

73,

Ken, W8EK

Ken Simpson
E-mail to W8EK@speakeasy.net or W8EK@arrl.net
Voice Phone  (352) 732-8400













_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>
  • [TenTec] TenTec HF xcvr and other misc items FS, Ken Simpson, W8EK <=