TenTec
[Top] [All Lists]

Re: [TenTec] Another "sometimes" audio problem Omni VI

To: tentec@contesting.com
Subject: Re: [TenTec] Another "sometimes" audio problem Omni VI
From: "Dr. Gerald N. Johnson" <geraldj@storm.weather.net>
Reply-to: geraldj@storm.weather.net,Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Tue, 13 Mar 2007 22:00:24 -0600
List-post: <mailto:tentec@contesting.com>
On Tue, 2007-03-13 at 22:03 -0500, k8vf_mark@centurytel.net wrote:
> I have an omni VI with a wierd issue.....sporadically, the audio goes 
> away....you can faintly hear it.
> 
> Turning rig off then on solves the problem.
> 
> Also, I have found that cycling the notch button brings the audio back.  It 
> just "pops" back on.
> 
> Has anyone seen this one?
> 
> Mark. 
> 
Same exact heat and cool cycle. Sounds like a missing solder connection
that has oxidized over the years. Very likely its around the notch
switch button. Or is in the switch contacts themselves. It could be a
broken weld inside transistor or chip too. Heat and cold, heat and cold.

73, Jerry, K0CQ

_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>