I saw something like this during the brief time I had 2.062a loaded.
Transmitting a single dit fixed it. Next time it happens, try that and let
us know if it worked.
73, Dick WC1M
> -----Original Message-----
> From: Owen S. Garner [mailto:k1af@bellsouth.net]
> Sent: Tuesday, June 05, 2007 1:35 PM
> To: tentec@contesting.com
> Subject: [TenTec] V 2.062a Orion 565AT
>
> Does any one have the same problem I have with V 2.062a? When I
> attempt to change bands or modes after a few minutes of operation, all
> signals are lost from the audio and the band scope, yet the rest of the
> display appears normal. Turning the Orion off, and back on after an
> hour or so, restores the signals, only to be lost again after a few
> minutes when attempting a band change. Master resets do not help. I
> reloaded V2.059, and the rig works normally,with no problems changing
> bands or modes. Meanwhile, I am living with V 2.059
> K1AF
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|