Thanks Larry, and Duane.
I'll configure it in the morning. I will also try using my SignaLink USB
interface to key the laptop keyboard and WL for CW exchanges. I have it
successfully working AFSK and PSK31 so far.
73 John K4NP
----- Original Message -----
From: "Duane Calvin" <ac5aa1@gmail.com>
To: "'Discussion of Ten-Tec Equipment'" <tentec@contesting.com>
Sent: Friday, July 20, 2007 8:50 PM
Subject: Re: [TenTec] Config help. Orion - Writelog - Windows XP
>I think he was looking for someone who is keying the Orion through the
> serial cable that connects a COM port directly to the rig. I still don't
> know that this can be done, though someone posted that it can. I key mine
> through a DigiKeyer off a USB port (virtual COM port) to the rear panel
> key
> jack (or accessory plug key input - I forget which). In case it's useful
> at
> all, here are my WriteLog parms:
>
> Com1 TenTec Orion, Baud:Auto, Poll: checked, CommPTT: Yes
> Com2 n/a
> Com3 n/a
> Com4 n/a
>
> CW Keyer Type: PC Generates
>
> The interface is via MicroHam DigiKeyer via their Eltima virtual ports
> (Com1-3, and 8 are virtual COM ports created by the driver software.)
>
> FWIW.
>
> 73, Duane
>
>
> Duane Calvin, AC5AA
> Austin, Texas
> www.ac5aa.com
>
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
>
> --
> Internal Virus Database is out-of-date.
> Checked by AVG Free Edition.
> Version: 7.5.472 / Virus Database: 269.10.4/898 - Release Date: 7/12/2007
> 4:08 PM
>
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|