I think he was looking for someone who is keying the Orion through the
serial cable that connects a COM port directly to the rig. I still don't
know that this can be done, though someone posted that it can. I key mine
through a DigiKeyer off a USB port (virtual COM port) to the rear panel key
jack (or accessory plug key input - I forget which). In case it's useful at
all, here are my WriteLog parms:
Com1 TenTec Orion, Baud:Auto, Poll: checked, CommPTT: Yes
Com2 n/a
Com3 n/a
Com4 n/a
CW Keyer Type: PC Generates
The interface is via MicroHam DigiKeyer via their Eltima virtual ports
(Com1-3, and 8 are virtual COM ports created by the driver software.)
FWIW.
73, Duane
Duane Calvin, AC5AA
Austin, Texas
www.ac5aa.com
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|