TenTec
[Top] [All Lists]

Re: [TenTec] Setting an OmniVI plus as a digi rig

To: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Subject: Re: [TenTec] Setting an OmniVI plus as a digi rig
From: Bob Towers <mm0rkt@beeb.net>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Wed, 31 Oct 2007 18:50:15 +0000
List-post: <mailto:tentec@contesting.com>
Keith Bainbridge wrote:
> With the imminent arrival of my K3 to become the main radio for SSB use 
> here, I decided to use the Omni VI plus as a digi only radio.
> PSK, rtty and other exotic modes as required, but what filters would you 
> guys recommend I fit please?
> There are none in it at the present so where do I start
> Thanks in advance and direct mail is fine.
> 73
> Keith
> 
I run digi most of the time. My Omni V has 2.4, 1.8, 500 and 250Hz 
filters. The first two are far too wide (except the 1.8KHz for 1000Hz 
Olivia). The 500Hz I use for 500Hz Olivia and the 250Hz for the rest ie 
PSK31, RTTY, PSK63, MFSK. The PBT is very handy, too.

73

Bob
MM0RKT


_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>