I'm having the following problem when I try to power on my Orion II:
After turning on the power switch, the xcvr cycles at about once per second,
continuously from power on to power off for as long as I leave the power switch
turned on.
For a fraction of a second, the alc light and meter light come on then go back
off in sequence with the power cycling. Also, as the lights go on & off, I can
hear the relay operating in my amplifier.
With all cables disconnected from the xcvr except the power cable, the on/off
cycling still happens.
I have measured the pwr supply voltage at 13.9V, and also tried another power
supply known to be good.
I have had the xcvr for less than 1 year, so it's still under warranty, but
trying to avoid sending it back to the factory.
Has anyone on the list had the same problem? Or have an idea what might be the
cause?
Tnx & 73,
Tim - N3XX
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|