TenTec
[Top] [All Lists]

[TenTec] Fw: balanced antenna tuner ( or how to do things on the cheap-

To: "tentec" <tentec@contesting.com>
Subject: [TenTec] Fw: balanced antenna tuner ( or how to do things on the cheap- tribute to Geoff's drive for cost effect
From: "JAMES HANLON" <knjhanlon@msn.com>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Wed, 30 Apr 2008 10:32:32 -0600
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
----- Original Message ----- 
From: JAMES HANLON<mailto:knjhanlon@msn.com> 
To: mjlowensteijn@hotmail.com<mailto:mjlowensteijn@hotmail.com> 
Sent: Wednesday, April 30, 2008 10:30 AM
Subject: Re: [TenTec] balanced antenna tuner ( or how to do things on the 
cheap- tribute to Geoff's drive for cost effect


Marinus,

Thanks for the reference to the S-Match.  That's a neat development from my 
beloved, link-coupled, parallel-tuned circuit tuner.  I filed it for future 
reference.

Jim Hanlon, W8KGI
  ----- Original Message ----- 
  From: Marinus Loewensteijn<mailto:mjloewensteijn@hotmail.com> 
  To: tentec@contesting.com<mailto:tentec@contesting.com> 
  Sent: Wednesday, April 30, 2008 2:44 AM
  Subject: [TenTec] balanced antenna tuner ( or how to do things on the cheap- 
tribute to Geoff's drive for cost effect



  Geoff
   
  In your drive for equipment on the cheap I like to draw your attention to the 
S-Match as promoted by PA0FRI: 
http://www.xs4all.nl/~pa0fri/ATU/Smatch/smatcheng.htm<http://www.xs4all.nl/~pa0fri/ATU/Smatch/smatcheng.htm>
   
  It uses only three components, tunes very easily and can handle both balanced 
as unbalanced antennas. Unfortunately you may have to build a different version 
for 160m than for 10m because minimum capacitance values do have an impact.
   
  It should be the ideal beginner's project, in particular if I see prices 
asked for "commercial" antenna tuners and which often contribute a considerable 
expense towards establishing a station. 
   
  By the way - even with the older tentec gear like the Omni-C one does not 
need a SWR meter since that is already built in to the rig. (And "standalone" 
SWR meter's  prices are through the roof for such a simple piece of equipment)
   
  Enjoy, 73, Marinus, ZL2ML
  _________________________________________________________________
  Connect to the next generation of MSN Messenger 
  
http://imagine-msn.com/messenger/launch80/default.aspx?locale=en-us&source=wlmailtagline<http://imagine-msn.com/messenger/launch80/default.aspx?locale=en-us&source=wlmailtagline>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>