I just got a length of RG400 to experiment with in the "twin feed"
configuration - I'm quite pleased with the results which should be fine
for my HexBeam application.
With the measured braid diameter (3.9mm) and FEP jacket diameter
(4.9mm), you'd predict a Zo of 58 Ohms and Vf of 0.69. However, in this
configuration air still forms a significant part of the dielectric and
the effective Dielectric Constant reduces from 2.1 to 1.56, increasing
the Zo to 67 Ohms and the Vf to 0.8
Assuming the FEP is not modified in some way, its low loss-tangent
(0.0002) results in a predicted loss of 0.024dB / meter at 30MHz.
Together with a Dielectric strength of 50kV per mm I reckon the power
handling should be fine.
The cost of RG400 probably makes it prohibitive for normal feeder
applications, but it'll be fine for the short lengths needed to
interconnect HexBeam elements (18" max).
There's a photo on my website of the configuration before I swapped the
RG58 for RG400:
http://www.karinya.net/g3txq/hexbeam/gallery/index.html?cat=3&n=20
73,
Steve G3TXQ
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|