Jim: That's exactly what I am seeing and what I believe has been described
by others. The 'spectrum trace' red (which is a peak-hold trace) is all
you're supposed to see and is one of the improvements over the previous
versions.
Ron N6IE
www.N6IE.com
----- Original Message -----
From: "Jim M." <jmiller1706@cfl.rr.com>
To: "'Discussion of Ten-Tec Equipment'" <tentec@contesting.com>
Sent: Sunday, March 08, 2009 2:54 PM
Subject: Re: [TenTec] NEW Orion II/2.041XL Bug? Red Scan With Vertical
LinePatterns
> The radio had been running on Rx for a few hours, 20 and 80 meters. The
> 80m
> band was dead, mostly just local line noise.
>
> I am now getting the normal white spectrum, but now behind it the entire
> scan screen (up to the blue marker, is filled with red, first solid red,
> then alternating red/black that starts at the top and walks downward, then
> solid red again. Occasionally the white spectrum trace will wipe itself
> away from right to left. Is this what you folks are seeing, or is this
> new?
> By turning sweep off and on again it began working correctly.
>
> Previously I had only seen this as a brief red spectrum trace (the white
> trace disappears for a half second or so), and I thought this was what you
> were seeing. Just before this new phenomenon started, I was tuning and
> happened to catch the spectrum in a "red only" trace...and it froze in all
> red color as long as I would turn the tuning knob.
>
> I took some photos at: http://s685.photobucket.com/albums/vv219/N4BE/
>
> Jim N4BE
>
>
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|