seems the radio works, but not with someone else's software, so that means
it's a problem with
Ten-Tec's software????
Call N4PY seems more appropriate
--------------------------------------------------
From: "Rick W" <ve7tk@yahoo.ca>
Sent: Friday, May 15, 2009 1:27 AM
To: "Ten-Tec Reflector" <tentec@contesting.com>
Subject: [TenTec] Orion 565 Problem with 2.063Xg??
I think I've found a problem with 2.063Xg. Here's the scenario.
1) I have my 565 under the control of the N4PY software.
2) I go to the RX menu and toggle the AGC System Type (it doesn't seem
to matter which way I go).
3) Back out of the menus
After doing this exercise I lose all serial control of the Orion. In
addition the remote pod doesn't work. The work-around is to turn off the
software and reboot the Orion.
IF I am not using the serial port with an external program and toggle the
AGC the remote pod works BUT when I try to start some external software
the serial port is dead. The same work-around solves the problem.
Before I report this to T-T I'd be curious if others are experiencing
this?
Thanks.
73,
Rick
VE7TK
Website: http://www3.telus.net/ve7tk
__________________________________________________________________
The new Internet Explorer® 8 - Faster, safer, easier. Optimized for
Yahoo! Get it Now for Free! at
http://downloads.yahoo.com/ca/internetexplorer/
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|