TenTec
[Top] [All Lists]

Re: [TenTec] [TEN TEC] Centaur

To: tentec@contesting.com
Subject: Re: [TenTec] [TEN TEC] Centaur
From: Hamdriver66@aol.com
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Mon, 29 Jun 2009 11:03:34 EDT
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
Thanks for all the good responses.  I dashed my first note off pretty  
quickly and didn't include all the details of my set-up.
 
Am driving the Centaur with an Omni VI (upgrade 1), keying lines connected  
for QSK.  I haven't lifted the hood yet to check the method of relay  
mounting.  Just seeking thoughts right now until I get caught up on my  
"honey-do's" and have time to do some digging.  Part of what I am wondering  is 
if 
the relay noise is as loud on other Centaurs as mine.  It sounds like  an old 
SB220 trying to keep up with QSK at 15 to 20 wpm.  Up around 30 to  35 wpm 
the relay doesn't have time to drop out between individual dits and dahs,  
but drops out at end of a word. 
 
I am familiar with the quietness of c/o relays (i.e., reed relays) in most  
of TenTecs transceivers (back to the Triton IV), but the Centaur relay in  
question is much louder, a hard clackety-clack.
 
Again, thanks for the many suggestions (duct tape included).
 
73, Mike/K4KJC
**************It's raining cats and dogs -- Come to PawNation, a place 
where pets rule! (http://www.pawnation.com/?ncid=emlcntnew00000008)
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>