Ivin,
While I have not tried my TT-715 on anything other than my Omni VI plus, my
experiences with other TT transceivers lead me to believe you you will be well
satisfied with the TT-715 driving the microphone input of your Omni C.
Most likely you will need to ask TT to build you a custom output cable, which
should be no problem as they will know what your Omni C takes. The biggest
problem will be matching your Electrovoice 606 mic cable termination to the
TT-715 and it may be easier to just use a relatively inexpensive computer mic
with 1/8 mono plug if you don't want re-terminate the 606.
73,
Gary - AB9M
--------------------------------------------------
From: "Ivin Flint" <ivinflint@yahoo.com>
Sent: Sunday, November 15, 2009 12:15 PM
To: <tentec@contesting.com>
Subject: [TenTec] It the 715 speech processor for my Omni C?
> I have been looking at the TenTec 715 speech processor on the Ten Tec web
> site and now saw a review on it in the latest QST. From what I read it would
> be very effective on a radio that does not already have speech processing in
> the transceiver.
>
> I wonder if it would be effective in my Omni C? I use a Electrovoice 606
> high impedance mic. The article says it takes any microphone with a
> impedance of 50kohm or less so I guess there is one problem. The hook up
> cables from the rig to the processor sound like none are made for the stereo
> plug mic jack in the Omni C. I think the manual of the Omni C calls for a
> high impedance mic so maybe this isn't really for the vintage that I use.
>
> I though bringing it up here might help more than just myself. Any ideas?
>
> Ivin W9ILF
>
>
>
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|