If you put the 217 in the slot on the PBT board it will not work. The 217 is a
9 MHz IF filter, the PBT board of the Corsairs use the 28# series of filters (6
MHz) not the 21# series..
You could get away with the 217 in the first IF filter slot (the one not on the
PBT board) but that will make the radio not usable for SSB,
Duane
N9DG
--- On Fri, 11/27/09, g p <n2wjw@yahoo.com> wrote:
> From: g p <n2wjw@yahoo.com>
> Subject: [TenTec] Corsair ,help with cw filter!
> To: tentec@contesting.com
> Date: Friday, November 27, 2009, 4:24 PM
> Installed the 217 cw filter in my
> Corsair 1 but when switched to the filter position the gain
> drops considerably and there is white noise, I also tried a
> different 217 and the same thing lots of white noise and
> only the stronger signals are heard, the weaker signals
> disappear in the white noise and this is with the preamp on,
> also while in the narrow mode the PBT does not function at
> all. This does not happens in my Omni D-B or my Argosy.
>
> Any thoughts?
>
> Thanks, Gil
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|