Hi,
Have you got the jumper fitted on the back where the external vfo connects?
Funny things happen without it.
Tim
gm4lmh
----- Original Message -----
From: "g p" <n2wjw@yahoo.com>
To: <tentec@contesting.com>
Sent: Sunday, January 17, 2010 12:24 AM
Subject: [TenTec] Corsair frequency display issue
Thanks to all the people here for helping me with the AGC problem, now that
I got that working, thought I leave the best for last.
The frequency display's mhz digits are off on most bands, for example the
3.5mhz band reads 1.500, the 7mhz band reads 5.000, the 10mhz band reads
18.000, the other bands are good. In other words the three last digits (khz)
are accurate on all bands where the first (mhz) digits are off on the bands
mentioned.
This feels like a more complex issue to resolve but Im open to comments
Gil
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec
|