TenTec
[Top] [All Lists]

Re: [TenTec] TT Centurion AMP failure

To: tentec@contesting.com
Subject: Re: [TenTec] TT Centurion AMP failure
From: "Dr. Gerald N. Johnson" <geraldj@weather.net>
Reply-to: geraldj@weather.net, Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Wed, 17 Feb 2010 19:32:28 -0600
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
On Wed, 2010-02-17 at 23:29 +0000, Mike Schatzberg wrote:
> The triodes are a zero bias tube, and 200 mils sounds close for no bias 
> voltage. The amp should still make power, although in the wrong class of 
> service. If it does make power, you have lost your cut off bias voltage and 
> will have to trouble shoot that circuit. If both tubes are glowing about the 
> same color, good chance the bias supply is your problem or your bias voltage 
> switching. 73 and Happy DXing, Mike W2AJI Tryon NC
> 
> 
Or the keying line is stuck keyed to transmit. Might be a cable or the
driver, not the PA.

73, Jerry, K0CQ


_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>