TenTec
[Top] [All Lists]

Re: [TenTec] QRPp experiment on the Omni VI

To: tentec@contesting.com
Subject: Re: [TenTec] QRPp experiment on the Omni VI
From: K8mp@aol.com
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Wed, 10 Mar 2010 10:08:38 EST
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
Here's my story...
 
Several years ago I was in a CW QSO and decided to  switch to a straight 
key in mid-stream. I turned the drive all the way down on  my OMNI-6 Plus so I 
could adjust the key spacing while listening to  the side-tone.
 
I tapped the key a few times and the guy I was in  QSO with thought someone 
was trying to break-in. Turns out I was S-5 on his  receiver and another 
station who was reading the mail gave me an  S-4.
 
I had 3 watt-meters in line (the Omni 6's, the one in  my tuner, and one in 
the line to the antenna)
None of them registered any movement, so my  output had to be in the in the 
100 milli-watt range.
 
I still get a kick out of telling that  story.
 
Later,  Joe
 
 
 
In a message dated 3/10/2010 7:36:40 A.M. Eastern Standard Time,  
jagoudie@comcast.net writes:

Hi  y'all...

Let's have some fun with the discussion about the output of  the Omni VI 
set at minimum output.  Try operating with the power control  turned fully 
down (ccw) and see what contacts are made.  Post your  results here!

Other rigs are welcome to join in, as well  :-)   Just post the rig you are 
using along with your  "results."

Jim,  AF3Z
_______________________________________________
TenTec mailing  list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>