TenTec
[Top] [All Lists]

Re: [TenTec] Scout 555 MIC Gain Question...

To: wb2vuf@arrl.net, Discussion of Ten-Tec Equipment <tentec@contesting.com>
Subject: Re: [TenTec] Scout 555 MIC Gain Question...
From: Mike Bryce <prosolar@sssnet.com>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Sun, 28 Mar 2010 15:50:26 -0400
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
yeah, about 9 for me as well using the cheap 505 hand mic from TT will  
send the ALC led flashing like mad



Mike, WB8VGE
SunLight Energy Systems
The Heathkit Shop
http://www.theheathkitshop.com/
J e e p
o|||||||o
Note: No trees were killed in the sending of this message, but a large  
number of electrons were terribly inconvenienced




On Mar 28, 2010, at 3:00 PM, Bwana Bob wrote:

Ben:

No, that is not normal. I run my Scout mic gain between 9 and 10
o'clock. I get plenty of audio and good reports. The Scout seems to do
best with low Z dynamic mics. If you are using an electret mic, make
sure there is mic preamp  voltage from the Scout on pin 4 of the mic  
jack.


_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>