TenTec
[Top] [All Lists]

Re: [TenTec] quick 234 Processor question

To: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Subject: Re: [TenTec] quick 234 Processor question
From: Michael Goins <wmgoins@gmail.com>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Mon, 29 Mar 2010 09:04:34 -0500
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
The 234 is the analog version of the new 715, and Stan tells me it should
work fine. Hope so - I have a very clean version here. Not sure how to set
things on the Jupiter for the mike if I am going to use it though. I'd
assume, at the minimum, I need to turn off the Jupiter's processor, if not
all the mike settings. Not sure.

Michael Goins, k5wmg
Professor, Writing
University of Texas at San Antonio

Mike
Pipe Creek, Texas
Fast cars, slow boats, big dogs, and summers off to write


Michael Goins, Editor/Publisher
Natural Awakenings-San Antonio/Hill Country magazine. Our printed edition is
currently distributed throughout Bexar, Kendall, Comal, Bandera, Kerr and
Gillespie counties - with 20,000 magazines in 450+ locations - and our
eco-friendly online edition gets emailed across the globe every month!
----------------------------------------------------------------------
No trees were destroyed to send this e-mail, but a good many electrons were
seriously agitated.
----------------------------------------------------------------------





On Mon, Mar 29, 2010 at 8:57 AM, Val Erwin <valerwin@att.net> wrote:

> Hi Mikey.......
>
> Sounds like you are coming along OK with the new blue-faced Jupiter. I sold
> my green faced Jupiter back a couple of weeks ago.........
>
> Speaking of processors, dunno' about the 234 but I have one of the newer
> T-T 715s and it is great.......I use it in front of the T-T Omni 7. If you
> ever get a chance to pick up one, do so.......
>
> Carry on.........
>
> Val Erwin / W5PUT
> Flower Mound, TX
>
> --- On Sun, 3/28/10, Michael Goins <wmgoins@gmail.com> wrote:
>
>
> From: Michael Goins <wmgoins@gmail.com>
> Subject: [TenTec] quick 234 Processor question
> To: "Discussion of Ten-Tec Equipment" <tentec@contesting.com>
> Date: Sunday, March 28, 2010, 11:04 PM
>
>
> I have a 234 that I want to wire back up, but the original 4 wire plug had
> the wires cut off of it.
>
> The 234 has what looks like regular zip cord coming out of the back of it
> and when split, one side contains a coax-appearing line and a ground (or
> shield), and the other side of the zip line has a red wire and a ground (or
> shield).
>
> Pretty sure that the coax-looking line with the shield is the audio and
> ground and they go to #1 and #2 on the mike plug, but not sure which on the
> red and the braid of the other side goes to #3 and #4 (assuming I am right
> about the first two positions). Anyone know off hand?
>
> Mike, k5wmg
> Pipe Creek, Texas
> Fast cars, slow boats, big dogs, and summers off to write
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec
>
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>