TenTec
[Top] [All Lists]

Re: [TenTec] Opinions on the Paragon

To: <tentec@contesting.com>
Subject: Re: [TenTec] Opinions on the Paragon
From: "Vic Klein" <vhklein@ptd.net>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Tue, 6 Apr 2010 08:09:44 -0400
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
Yes, as Joel says there is a well-marked jumper on the main processor board
that you clip, then you just add the 60m frequencies (appropriately offset
for standard ham conventions, like 5.3305 for 60M CH1) to your memory and
remember the power restrictions and you're good to go! Mine are
appropriately set as the 1st 5 memory channels for ease in remembering. The
Paragon also allows you to display your call (or anything else within the 7
character limit) on VFO use by entering it as the memo tag on channel zero,
which I have set to WWV. Cool stuff!

=Vic=
WA4THR

----------------------------------------------------------------------------
------------
To:  Discussion of Ten-Tec Equipment <tentec@contesting.com> 
Subject:  Re: [TenTec] Opinions on the Paragon 
From:  jrhallas@optonline.net 
Reply-to:  Discussion of Ten-Tec Equipment <tentec@contesting.com> 
Date:  Mon, 05 Apr 2010 17:54:08 +0000 (GMT) 
List-post:  <tentec@contesting.com">mailto:tentec@contesting.com> 

To my knowledge, there is no easy way to add just 60 meters to a Paragon's 
transmit range. It is very simple, however, to let it transmit over all of
its 
range. There is a wire on top of the chassis that has a tag on it that reads

"amateur" or something (sorry I'm at the office right now, out of range of
the 
radio). If you clip that, it will transmit everywhere, including on 60
meters. 
This requires caution, obviously, but it seems to work fine on mine, and has

been that way for many years.

Very nice radio, except the close-in dynamic range doesn't match current top

line transceivers with narrow roofing filters. 

GL & 73, Joel
Joel R. Hallas, W1ZR

----- Original Message -----
From: Gordon Gibson 
Date: Monday, April 5, 2010 10:58 am
Subject: Re: [TenTec] Opinions on the Paragon
To: Discussion of Ten-Tec Equipment 

> Hi Vic & Group
> 
> Does the Paragon transmit on 60m then ? 
> 
> am I correct in thinking that seeing as its general coverage RX 
> it possibly needs a modification.
> 
> 73 de Gordon G3ZFZ

 

_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>