TenTec
[Top] [All Lists]

Re: [TenTec] Omni 6 Logic Board Failure

To: tentec@contesting.com
Subject: Re: [TenTec] Omni 6 Logic Board Failure
From: Neal Laugman <neal.laugman@gmail.com>
Reply-to: Discussion of Ten-Tec Equipment <tentec@contesting.com>
Date: Fri, 14 Jan 2011 03:41:26 -0600
List-post: <tentec@contesting.com">mailto:tentec@contesting.com>
> Did they narrow it down to an unobtainable chip, or just ...bad logic
> board? Some obsolete chips are hard to find, but
> still ...eventually...can be found

Agree. I think I'd ask TT to get VERY specific about what part failed -
not just say it's a bad  board thinking that sort of reply gets them
off the hook. This problem has wider ramifications about company policy
in general. (And I should say that I am not sure about which part we
are talking about, so my comments are of a general nature.) 

For instance: It's one thing to say that a rig like a
Triton has limited possibilities for final replacement because of
obsolete transistors or that it's hard and expensive to find
MRF458's for the Corsairs and others and quite another thing to trash
an entire radio because of a single failed non-RF chip - IMHO. One need
only to look at a VI brochure to see how the rig was marketed (i.e.,
with a computer ...)

TT has always been up front with their engineering and schematics and
I wonder if something is changing. I MIGHT understand proprietary issues
with custom software are involved, but hey - if I end up having that
problem with my VI+ I will guarantee TT an earful :) 

So if this is the case, why should I abandon my VI+ to purchase a VII
only to have the same thing done to me again at some future time? Seems
like a good way for a company to loose customers; a company whose
followers have almost a religious devotion to them.

-- 
Neal, NL7VL

-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
On Thu, 13 Jan 2011 21:22:42 -0500
"Dave Edwards" <kd2e@comcast.net> wrote:

> Did they narrow it down to an unobtainable chip, or just ...bad logic
> board? Some obsolete chips are hard to find, but
> still ...eventually...can be found!
> ....Dave
> ----- Original Message ----- 
> From: "Carter" <k8vt@ameritech.net>
> To: "Discussion of Ten-Tec Equipment" <tentec@contesting.com>
> Sent: Thursday, January 13, 2011 7:30 PM
> Subject: Re: [TenTec] Omni 6 Logic Board Failure
> 
> 
> > On 1/13/2011 5:39 PM, Don Steele wrote:
> >>  Well, my Omni 6 is in for repair, and Ten Tec has diagnosed a
> >> logic board failure. Due to the unavailable chips, this means a
> >> dead radio. I know this isn't the first and wont be the last of
> >> these great rigs to suffer this fate. Has anyone out there come up
> >> with a fix?? Please reply off line of any solutions.
> >
> > Let me respectfully ask why reply off line? I would think this topic
> > would be of general interest to many.
> >
> > _______________________________________________
> > TenTec mailing list
> > TenTec@contesting.com
> > http://lists.contesting.com/mailman/listinfo/tentec 
> 
> _______________________________________________
> TenTec mailing list
> TenTec@contesting.com
> http://lists.contesting.com/mailman/listinfo/tentec

-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
_______________________________________________
TenTec mailing list
TenTec@contesting.com
http://lists.contesting.com/mailman/listinfo/tentec

<Prev in Thread] Current Thread [Next in Thread>